Painter’s Touch White Primer

Sandpaper

Various sizes and styles of frames

Remove any loose paint from surfaces with sandpaper.

Clean surfaces with soap and water and allow to fully dry.

Apply Painter's Touch Primer and allow to fully dry. As always, please follow manufacturer’s recommendations on application and dry times.

Apply 2 light coats of Painter's Touch Flat White spray to surfaces. If a second coat is necessary, recoat within 1 hour or after 24 hours.

Tip: Lay out your frames on paper before hand. Trace around each frame to determine where the picture hangers should be. You can then tape the paper to the wall and use it as a template to hang your frames.