Stops Rust MultiColor Texture Radiant Brass Spray

Sandpaper or wire brush

Painter’s tape

Drop cloth

Masking paper or newspaper

Do not spray indoors – use outdoors or in a well-ventilated areas such as an open garage.

Cover hardware with painter’s tape and cover mirror with newspaper or masking paper.

Remove loose paint with wire brush or sandpaper.

Lightly sand glossy surfaces.

Clean with soap and water and let dry.

Spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep can the same distance from the surface and in motion while spraying.

Apply 1 light coat followed by 1 “wet” coat for best appearance. (A “wet” coat should appear shiny as it is applied to the surface.)

Dries tack-free in less than 10 minutes and is fully dry in 30 minutes. Recoat anytime.

Tip: If paint gets on mirror surface, gently scrape away with a razor blade.