9" Roller frame with extension handle

1/2" Nap roller cover

Mixing stick

EPOXYSHIELD Blacktop Cleaner & Degreaser (optional)

EPOXYSHIELD Blacktop Patch & Crack Filler (optional)

Clean the entire driveway surface making sure it is free of dirt, debris, oil and grease spots. Trim any grass or weeds overgrowing on to the driveway.

Scrape clean all cracks and holes using a screwdriver or wire brush.

Remove remaining dirt, dust and debris by sweeping with a broom.

Rinse entire driveway with fresh water and allow surface to dry.

Repair major cracks and/or holes prior to coating with EPOXYSHIELD Blacktop Patch & Crack Filler (follow product instructions for use)

Apply Blacktop Coating onto driveway once the driveway is properly cleaned and all holes/cracks have been repaired.

Apply coating with long handled roller in 4'x4' sections. Cross-roll using perpendicular strokes in each section for better coverage.

Let dry for 1 hour prior to foot traffic and 4 hours prior to car traffic.

*Apply between 50°F-90°F (no rain forecasted for 48 hours)