metal floor grate with a back

a piece of wood the same size as the grate

3 Tartlet molds

Rust-Oleum Metallic Oil Rubbed Bronze, Metallic Sliver and Clean Metal Primer spray paints

Clean the rust off the grate and spray with the primer. Let dry

Attach the tartlet molds to the wood. I drilled a hole in the middle of the mold and attached the mold to the wood with a screw. Paint this with the oil rubbed bronze paint

Paint the front of the grate with the oil rubbed bronze. I used a plastic bag to cover the back so it would not get paint on it.I did two coats Let dry. Then do the reverse on the back grate with Metallic sliver.

Open the grate so it sits like a book and put your wood piece in the middle.

Lite you and candles and enjoy the warm glow